musical instruments

  • An Easy, Convenient and Practical WayYour Brass Instruments Clean 

     

      brass instrument is a musical instrument that produces sound by sympathetic vibration of air in a tubular resonator in sympathy with the vibration of the player’s lips. Brass instruments can also be called labrosones, which literally means lip-vibrated instruments.

    Therefore, there are several factors involved in producing different pitches on a brass instrument which include; slides, valves, crooks or keys are used to change vibratory length of tubing, thus changing the available harmonic series, while the player’s lip tension and air flow can serve to select the specific harmonic produced from the available series.

    The view of most scholars is that the term brass instrument which should be defined by the way the sound is made and not by whether the instrument is actually made of brass. Thus one finds brass instruments made of wood, like the alphorn, the Cornett while some woodwind instruments are made of brass, like the saxophone.

    Modern brass instruments come in one of two families:

    1. Valve brass instruments, which use a set of valves operated by the player’s fingers that introduce additional tubing, or crooks, into the instrument, changing its overall length. This family includes all of the modern brass instruments except the trumpet, horn, euphonium, and tuba, the cornet, flugelhorn, baritone horn, sousaphone and the mellophone..
    2. Slide brass instruments, which use a slide to change the length of tubing. The main instruments in this category are the trombone family, though valve trombones are sometimes used, especially in jazz. The trombone family’s ancestor, the sackbut, and the folk instrument bazooka are also included in the slide family.

    Therefore, there are easy and convenient ways to keep brass instruments clean as follows, 

      1.  Take instrument apart

    Always depress valves when removing slides from instrument to avoid air pressure build up, which can fatigue metal.  Carefully remove all slides, clamps and valves. Handle with care, where one dent can result in costly repairs. If a slide or cap is frozen in place, do not force, take to a qualified repair shop for removal.

      1. Wash instrument/pieces

    Submerse the instrument in warm soapy water. While under water, instrument may be cleaned out with a long flexible cleaning brush. Be sure to rinse well before reassembling.

    Individually clean each slide, cap and valve in warm soapy water.  If taken apart, give careful attention to position of felts/corks.

      1. Dry instruments and parts

    Use care to dry each part individually using lint free towel or cloth. Valves in particular must be cleaned with lint free materials and checked for lint or dust before placing back into instrument, see more.

      1. Lubricate and reassemble

    Put slide grease or Vaseline on tuning slides. Then, completely coat the part that is inserted.

    Failure to use grease will result in frozen/stuck slides. Slide grease can also be used on the screw on caps which helps to keep them from getting stuck. Put valve oil on valves before placing in horn.

    Valve oil prevents corrosion of the inside of your instrument. Be sure to keep valves oiled regularly.

    1. Wash Mouthpiece

    The mouthpiece should be washed more often than the instrument. Mouthpiece brushes are available but not necessary if mouthpiece is cleaned regularly. The mouthpiece is the only part of the instrument that can boiled and also should be boiled. Boil for a few minutes at least twice a year to keep sterile and germ free. Also boil mouthpiece after a cold/flu. Check this : https://www.bandinstrumentsguide.com/.

     

  • The inner beauty of woodwind instruments

    mandolinsa

    Maple, Spruce, Poplar … if you understand a bit of musical instruments you must have come across these names when looking for your next band instruments. But if you do not know all of them, let’s give you a tour regarding woodwind instruments.

    First of all, it is important to say that the wood used in the manufacture of an instrument, whether it is an marching band instruments or not, is responsible for most of its sound characteristics (such as timbre and sustain) and of course, for the aesthetic characteristics. It is interesting to note that the wood has different functions, depending on the area in which it will be used (top, sides, arm, scale, bottom).

    It is worth remembering that the main woods used do not represent all the tonal aspects of the instrument. Design, manufacturer’s or luthier’s expertise and quality of each piece of wood used are also important factors. That said, we can talk about each type of wood.

    Hard pressed Sitka wood and Ovangkol

    Even being hard-pressed, this wood can sound clear, making the Sitka an excellent choice for musicians whose style requires a broad dynamic response and a more robust tone. On the other hand, the lack of a more complex tone makes Sitka sound a little thin to the slight touches, but of course everything depends on the design of the instrument and the other woods involved.

    Ovangkol is an original wood from West Africa. Normally, its coloration goes from yellow-brown to dark brown and has stripes ranging from gray to almost black. The diversity of Ovangkol and grain pattern resembles the Eastern Indian jacaranda. It also shares some features with pink tones, but sports the “brightness” alive found in medium density woods, such as mahogany, walnut and koa. It is perfect for band instruments.

    Although widely used in luthierias, Ovangkol is a very exotic wood. She designs fuller and more engaging timbres, somewhat correcting the “middle” deficit of other Folk guitars.

    Koa, Ash and Poplar

    Koa is an original wood from Hawaii that seems to be in extinction, so it is more expensive and hard to find. This medium density wood is widely used in acoustic instrument tops, bottoms and sides. It has an exotic but discreet design, with a coloration ranging from orange to reddish brown.

    It is a kind of rich cousin (in every sense) of mahogany. It has been increasingly used by the personal fingerstile (steel ropes) because of the good definition without being too dry.

    The Ash is a hard, porous and medium density wood, but very beautiful and with a brilliant sound, ideal for all sorts of band instruments. There is Light Ash or Swamp Ash, which is lighter and has a less full-bodied sound, and factories prefer this wood to conventional Ash, so the instrument will not cause back pain in musicians. An instrument with body made in Ash is certainly heavier than one in Alder, a characteristic that favors the mid and treble. This wood was used in the first stratos and in the teles.

    Poplar is a fibrous wood, dense, but very light and extremely resonant. When used on solid-bodied instruments, such as a guitar, it has a very clear sound. Known as tulip, yellow poplar or tulip wood, it is a good wood for those who like a cleaner sound in their band instruments.

  • What are Digital Pianos and How Do They Work?

    A digital piano produces sounds that are more or less like the actual piano. It duplicates the sound as well as the vibes when playing an acoustic piano. It is made up of a keyboard that is composed of optical and electronic sensors, and a weighted key action. The sensors are the ones responsible for detecting the velocity each time you strike the keys. The best digital piano will also have sound banks, speakers, and amplifiers. In some cases, they come with headphones as well. View full details at http://encoreyouthorchestra.org/learn-to-play-guitar-tips/

    For these pianos to work, a key must be pressed. It will then be detected by the sensors to determine the key velocity. The microchip will then produce the note that corresponds to the loudness in the same way that a sound is being produced in a piano. The keys are weighted so that the approximate feel of piano keyboard will be produced rather than that of an organ.

    Why Play Digital Keyboards?

    There are a lot of reasons for buying these instruments and reading digital piano reviews. First of all, they are portable. Compared with the usual pianos that weight at most 500 pounds, digital keyboards are only about 200 pounds. Some parts may also be disassembled and be brought anywhere you want. These pianos also need no tuning. Once or twice a year will already suffice. The sounds are stored digitally. This means that it will not go out of tune for a long time.

    It is also possible to play these pianos using a headphone. Therefore, if you hate bothering anyone when you practice, then you can just put on the headphone. To top it all, they are of low maintenance. Aside from not exposing them to direct sunlight or not letting them be affected by liquids, there is basically nothing much to do to maintain the condition of the piano.

    Digital PianosChoosing the Best Digital Piano

    There are a lot of things that you need to consider before you buy one. The first thing that you need to do is to listen to the sounds it produces. You can listen via headphone when you are buying one in a store. You should also determine if the feel of the piano is just right or not. Most of all, you need to compare the prices. Make sure that you are comfortable with the price and you have already checked various brands from different stores. You may also check them out online for more options.

  • Classification of musical instruments

    Ah amazingly! With passage of time the band instruments are getting increasing fame and demand. So, if we look at the old classification of musical instruments and the new classification of musical instruments then we will find a very clear comparison. There is a tremendous increase in the number of musical instruments and tactics of using them. What so ever, let us see the basic classification of musical instruments?

    Classification of musical instruments:

    The classification of musical instruments has been done under two categories i.e. the major category and the sub categories. The major category of musical instruments is the:

    Wind instruments:

    The wind instruments as its name indicates function well on the basis of “vibrating air”. Its quality is dependent on the vibrating mass of the air. The sub categories of wind instruments include:

    • Brass winds

    • wood winds

    • free reeds

    Now, the various instruments about which you listen and you knows comes under any of the above categories. You may look which of the band instruments comes under which of the categories:

    Brass winds – Trombone, Trumpet, and Tuba:

    It is of the most common category of the musical instruments. The most major instruments that come under this category include Trombone, Trumpet and the Tuba. Such instruments of barss winds produce the sounds by the breathing power of the produces. The lips are placed on the tip of the instrument and the variety of sounds is produced by the changing frequency of the sound. It is a handy category of band instruments which are lighter in weights and are kept all the time in the pocket bag.

    Wood winds – the saxophone, Clarinet, Oboes, Flutes:

    Woodwind instruments are the second good category of wind instruments. The major musical instruments that comes under this category includes saxophone, Clarinet, Oboes, Flutes. Most probably such musical instruments are made up of the wood. Most of these musical instruments functions well by the working of the mouth. Such instruments are usually heavier in weight.view this page for more updates.

    Free reeds – Accordions:

    The functioning and the music playing of such instruments is dependent on the size of the reed. You can change the pitch and the voice of the sound by changing the sizing and positioning of the reeds. Accordions are the most common type of free reeds instruments.

    musical instruments

    The above are the some of the major classifications of musical instruments. These instruments are used for variety of purposes and at variety of occasions. There are many musical instruments which can be played in collaboration with anther musical instruments. And even, you can also play the musical instrument of one category with the collaboration of the other category of instruments as well.see latest information at http://en.wikipedia.org/wiki/Musical_instrument

    “Wind instruments” are getting very above fame because of their simpler use. All of these instruments work on the mass of the air. You can add and subtract the pitch of voice and sound by changing the mass of the air. What so ever, these are the band instruments which is majorly categorized under the classification of musical instruments.

  • How works a Brass Instrument

    Without brass instruments the musical plays lacks the life. Such instruments bring a traditional feel within the play of music. The brass instruments come in variety of sizes and types. All the types owe its own fame because of its own function. Moreover, most of the instruments in the family of brass are “convertible”. You can alter the pitch of the tone, frequency and power of the instrument.learn more information from this article.

    How a brass instrument works:

    Basically every musical instruments works on some law or a principle. Similarly, the brass instrument works on the “principle of resonance”. The principle of resonance says, when you produces the sound by your mouth in the tip of the object i.e. the musical instruments, then the pitch of the mouth when shakes with the object creates a resistance called the resonance. Such a resonance of sound is actually the voice of the brass instruments.

    How the body is prepared:

    The body of brass instruments looks astonishing. Most probably, such musical instruments are plated with the materials like alloy or copper. Some of the bras instruments are also coated by the precious covering like gold or silver. The basic purpose of such immersive coating is to keep the instrument free from any sort of corrosion.

    Some sliding brass instruments:

    There is a wide variety of brass instrument. It is a myth that you can only put Trumpet under this category. “Brass instruments” is basically a family of musical instruments under which number of instruments comes like tuba, cornet, bazooka and trombone. The similarity of this family is they are made up of brass texture, having holes in their bodies for changing the pitch and the tone of the voice and are covered with coating as discussed above to avoid corrosion.

    How it functions:

    The functioning of such band instruments is really amazing and unique. If we look that how a brass instrument produces a sound then we will come to know that it do so by the “reflection” and by the “standing waves”. The producer produces various types of musical notes by changing the pressure of his/her breather. There is a removable mouth piece at the tip of such instruments.go to their website http://www.bandinstrumentsguide.com/ for more related information.

    How band instruments changes the pitch of vice:

    It is all the play of mouth’s pressure and breathes. The producer produces the sounds with variety of pitches by changing the pressure of breathe.

    Brass Instruments

    Where to use?

    The band instruments are used at various occasions like on parades, at the marching bands, in merriment occasions and at institutional functions. The players play various types of tones by the bliss of the instruments.
    Musical instruments come in the variety of the sizes, shapes and types.

    And one of the most amazing types among them is the brass type. The instruments under this family do not require any electronic settings for their working and functioning. You can play the brass instruments with the mouth and can add variety and versatility in it by changing the pressure of your breathe.